FINDER load control - FRONIUS special load shedding relay

The FINDER Charge Control is the essential ally of Fronius inverters, thanks to its seamless integration with the integrated Solar Router. Primarily designed for use with Fronius inverters, this device allows you to efficiently control your consumers such as water heaters, swimming pool filtration systems, etc., in the event of surplus solar energy.

Main features:

• Integration with Fronius inverters for optimal control of consumers.
• Direct hot water tank cut-off capacity up to 3680 W (16A, 230VAC).
• Simplified programming of load shedding relay outputs via the interface of your Fronius PRIMO, SYMO, or GEN24 PLUS inverter.

Connection Instructions:

• 12 VDC connection: Connect the "-" terminal (Ground) of the Fronius Datamanager card to Terminal A2 of the Finder relay, and the "0" terminal (+12V) of the Fronius Datamanager card to Terminal A1 of the FINDER.
• AC connection: Connect terminals 11 and 14 of the relay (lower part) for default operation (non-passing).

Compatibility:

• Compatible with Fronius PRIMO, SYMO and GEN24 PLUS inverters equipped with a Smart Meter.
• Multi-relay management capacity for up to 4 outputs controllable simultaneously.

Additional Uses:

• Can be used as a dry relay (dry contact) to trigger modern energy-consuming devices equipped with a "Trigger" input (heat pumps, electric heaters, swimming pool pumps, etc.).
• Suitable for a variety of residential and commercial applications requiring precise electrical load control.

Note: For detailed instructions on setting up and using FINDER Load Control with Fronius inverters, please refer to our specific guide "Controlling loads with Fronius inverters".

Technical Specifications:

• Single pole power shedding relay with 1x normally open (non-conducting) contact and 1x normally closed (conducting) contact.
• 12 VDC power supply from one of the 4 12 VDC outputs of the Fronius inverters.
• 230V AC cut-off capacity: 16 A, suitable for managing consumers up to 3680 W.